Security Laboratory DVR Manuel d'utilisateur télécharger pdf (Page 18)

Enter a name, password (twice), then click<Add>. Click on the new name in the User’s list,

and check the privileges you wish them to have. Five categories can be selected from the

drop list. Click <Save> when you are finished. <Apply><Next>

Alarm Setup Screen

NOTE: Alarm inputs for connecting the DVR to external triggering devices are optional on

some models.

Select the channel that you have connected a trigger device to, select *Normal Open or

*Normal Closed, and the duration the alarm recording desired. PTZ relate will send

instructions to a compatible PTZ camera when an alarm is triggered. Similar to motion

recording, check “Send E-mail”, and “Trigger Recording” for the channels that should respond

to the alarm, plus “Alarm Output” if you wish to trigger an external device.

*Normally Open (NO) = A switch, sensor, or other circuit that triggers an alarm when it is closed

(contacts touching).

*Normally Closed (NC) = A switch, sensor, or other circuit that triggers an alarm when it is

opened (contact separated or wire broken).

Click <Output Schedule> to set the hours of the day to send e-mails, for the internal buzzer to

sound, or for the alarm output to function if motion detection or an alarm input is triggered.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 54 55

Pas de commentaire

Security Laboratory DVR Manuel d'utilisateur Page 18